beautypg.com

Auxiliary audio equipment, Rotary commander rm-x4s, Auxiliary audio equipment rotary commander rm-x4s – Sony MEX-BT5100 User Manual

Page 21: Selecting auxiliary equipment, Adjusting the volume level, Attaching the label, Location of controls, Changing the operative direction

background image

21

Auxiliary audio equipment

You can connect optional Sony portable devices
to the BUS AUDIO IN/AUX IN terminal on the
unit. If the changer or other device is not
connected to the terminal, the unit allows you to
listen to the portable device on your car speakers.

Note
When connecting a portable device, be sure BUS
CONTROL IN is not connected. If a device is
connected to BUS CONTROL IN, “AUX” cannot be
selected by
(SOURCE).

Tip
When connecting both a portable device and a
changer, use the optional AUX-IN selector.

Selecting auxiliary equipment

1 Press (SOURCE) repeatedly until “AUX”

appears.
Operate by the portable device itself.

Adjusting the volume level

Be sure to adjust the volume for each connected
audio device before playback.

1 Turn down the volume on the unit.

2 Press (SOURCE) repeatedly until “AUX”

appears.

3 Start playback of the portable audio device at a

moderate volume.

4 Set your usual listening volume on the unit.

5 Adjust the volume level, following “Adjusting

menu items — MENU” on page 18. The input
level is adjustable from –6 dB to +6 dB.

Rotary commander RM-X4S

Attaching the label

Attach the indication label depending on how
you mount the rotary commander.

Location of controls

The corresponding buttons on the rotary
commander control the same functions as those
on this unit.

The following controls on the rotary commander
require a different operation from the unit.

PRESET/DISC control

The same as pushing the joystick up/down on
the unit (push in and rotate).

VOL (volume) control

The same as rotating the joystick on the unit
(rotate).

SEEK/AMS control

The same as pushing the joystick left/right on
the unit (rotate, or rotate and hold).

* Not available for this unit.

Changing the operative direction

The operative direction of the controls is factory-
set as shown below.

If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.

1 While pushing the VOL control, press and

hold (SOUND).

SOUND

DSPL

MODE

SOUND

DSPL

MODE

OFF

ATT

SOUND*

SOURCE

DSPL

MODE

OFF

VOL

SEEK/AMS

PRESET/

DISC

To increase

To decrease