Sony STR-DA90ESG - Manual (Page 36)

36
Sound Adjustment
SURROUND EDIT
WALL
EFFECT
LEVEL
SEAT
RETURN STANDARD EXIT
OTHER
REVERB
TEST
TYPE : SOFT1
FRONT
HARD
SOFT
EXIT
MODE
O N
O N
O N
SOUND FIELD
BASS BOOST
DIRECT PASS OFF
OFF
OFF
SUR EQ
THEATER
SURROUND EDIT
WALL
CENTER :
REAR :
+
– EFFECT
LEVEL
SEAT
dB
dB
+
–
RETURN STANDARD EXIT
OTHER
REVERB
TEST
BALANCE
+
– WOOFER : dB
+10
+10
+10
[ ] – – – – – – + – – – – – – b B
REAR
DELAY SETTING
CENTER
EXIT RETURN
REAR
p
p
ms
ms
0
5
+ –
+ –
Adjusting the delay time
Click SETUP in the main menu, then click DELAY.
Click the buttons next to each setting to adjust the
delay time as you desire.
CENTER
Use this adjustment to add a sense of depth to the center
channel. Longer delay times create a greater sense of depth.
The CENTER delay can be set from 0 to 5 ms (in 1 ms steps).
REAR
Use this adjustment to add a sense of depth to the rear
channel. Longer delay times create a greater sense of depth.
The REAR delay can be set from 0 to 20 ms (in 5 ms steps).
Adjusting surround sound parameters
(except for delay time)
Adjust the surround sound parameters to fit your
listening situation. See the chart “Adjustable sound
parameters” on page 34 for parameters you can adjust
in each sound field.
1
While playing a component, click SOUND in the
main menu to display the SOUND FIELD
SELECT menu.
2
Click a sound field genre, then click MODE
repeatedly until the mode you want appears.
3
Click SUR.
4
Click the icon for the parameter you want to
adjust.
The parameter chart for your selection appears.
See the next page for details of each adjustment.
5
Click an adjustment icon (+ / – , UP/DOWN,
SHORT, LONG, etc.,) to adjust the parameter.
To reset all parameters (except for the delay time) of the
current sound field to the factory settings.
Click STANDARD.