Sony STR-DA90ESG - Manual (Page 17)

17
Getting Started Setting Up the Remote for On-Screen Control
Registering a TV (or Monitor)
You must register the IR code of your TV (or monitor)
in order to turn on your TV automatically whenever
you turn on the receiver.
IR code registration is unnecessary in the
following case
If your TV is a Sony product that can be controlled by
an infrared remote, and it is connected to the receiver
by its VIDEO 1 video input jack, you do not need to
register its IR code.
Registering IR codes
1
Turn on the receiver and the TV.
Make sure the input selector on the TV is set to
the video input.
2
Click SETUP in the main menu.
3
Click TV SET.
4
• Sony TV
1 Click Sony TV.
2 Click VIDEO 1, 2 or 3 to select the video
input of the TV that is connected to the
receiver.
3 If your TV type is a wide screen type (screen
ratio:16 x 9), click WIDE (except for Australian
models).
The IR codes are automatically registered
and registration is complete.
• Non-Sony TV
1 Click OTHER TV.
2 Click VIDEO 1, 2 or 3 to select the video input
of the TV that is connected to the receiver.
3 If you are using a wide TV, click WIDE (except
for Australian models).
4 Go to step 5.
5
Cover the IR sensor on the TV to prevent
accidental operation. Otherwise, the on-screen
display may be turned off during the registration
procedure.
6
Click START.
(continued)
USER SUB LIST
+ – BAND FM 102.50MHz
STEREO
FUNCTION SOUND SETUP
TV FUNC
CD
IR
TUNER USER IR
EXIT
SET
SET INDEX
INDEX
INDEX
AUTO START SLEEP TIMER
OSD SETUP
MACRO PLAY
FUNCTION SOUND SETUP
SPEAKER INPUT MODE
DELAY
TV MONITOR SET
TV IR SET Sony TV
OTHER TV
NORMAL WIDE
1 VIDEO 3 2
TV SIZE
TV INPUT
EXIT RETURN
TV MONITOR SET
TV IR SET Sony TV
OTHER TV
NORMAL WIDE
1 VIDEO 3 2
TV SIZE
TV INPUT
EXIT RETURN
TV MONITOR SET
TV IR SET
START
Sony TV
OTHER TV
NORMAL WIDE
1 VIDEO 3 2
TV SIZE
TV INPUT
EXIT RETURN