SMC Networks SMC2664W - Manual (Page 16)

6
H
ARDWARE
I
NSTALLATION
Attaching the Clip (Optional)
1. Slide the open end of the clip under the two lips (at the USB port end)
in the square slot at the rear of the SMC2664W.
2. Press the two lugs into the slots until they click into place.
3. To remove the clip, push in one of the lugs and pull the clip away from
the SMC2664W body. The other lug should slip free.
Attaching the Magnets (Optional)
1. Peel the protective paper off the magnets and place the sticky side of
the magnets into the circular holes at the rear of the clip.
2. Press firmly.
Warning: Sticking magnets to a notebook screen will damage the screen.
Lips
Lug Slots
Lugs