Standard Horizon CP1000C - Manual (Page 24)

Page 26 GPS chartplotters
The MARK key
Places Mark under the ships position when in Home Mode (in Cursor Mode under the cursor).
The ROUTE key
When pressed places a Waypoint. Succeeding presses place more Waypoints to form a
Route.
The PWR key and Lamp/Contrast
Press and hold [PWR] to turn the chartplotter on or off. Once on press [PWR] to show the
Contrast and Lamp popup window. Press and immediately release [PWR] to adjust light and
contrast on the display.
The MOB key
When pressed the GPS chartplotter automatically places a Mark on the Chart Page and all
navigation is towards the position of the MOB Mark.
3.0a The alphanumeric keys on CP1000C
The 10 alphanumeric keys
The 10 alphanumeric keys are used for entering in alphanumeric data.
For alphanumeric input: pressing the key the first time enters the first letter, the second time
it enters the second letter, the third time it enters the third letter; the forth time it enters the
number. After a short time the entered character (letter or number) is confirmed and the
cursor is moved to the next location.
For numeric input: to enter a number in a Lat Lon: press the key of the number you wish to
enter, continue pressing the numbered keys until the lat lon is entered. The cursor is moved
to the next position. Pressing the ShuttlePoint knob up/down changes the value; pressing
the ShuttlePoint knob left/right moves the cursor to the previous/next location.
3.0b The soft keys on CP175C/CP1000C
The 5 keys in the bottom part of the front panel (hereinafter named soft keys) have different
functions associated depending on the software: their labels are shown on the screen
immediately above the keys (the user can customize the function associated).
The soft keys
These keys allow quick selection to the many pages the GPS chartplotter has. These key
can be customized to your preference, however from the factory the keys are preprogram-
med with the following pages. From left to right CHART, NAV, HIGHWAY, CELESTIAL,
NMEA DISPLAY. Press any of the keys and you will see popup windows above the keys.
To goto a specific page press the key with the desired popup window. The popup windows
will automatically disappear if a key is not pressed or can be removed by pressing [CLEAR].
3.1 GETTING STARTED
The Getting Started section will take you through the frequently used operations and assist
you to customize the look of the chartplotter.
Legend:
[MENU] If you see brackets around a bold and capital letter word this refers to a key press.
GENERAL SETUP When a word(s) is bold capital letters and underlined, this refers to a menu selection item.
3.1.0 Power On, Off and ShuttlePoint operation
1. Press and hold [PWR] until the display shows the startup page. To turn off, press and
hold [PWR] until the display turns off.