Samsung 5400 - Manual (Page 88)

88 Handbook
|
Programming Groups
1 Press the Select Function key.
2 Press the 8/Location Program One Touch key. The display
shows LOCATION PROGRAMMING.
3 On the numeric keypad, press the # key. The display
shows GROUP SETTING.
4 Using the numeric keypad, enter the two-digit group
number (01 to 20) you want to program.
5 The display shows
[the number of your current group]
SELECT LOC.(S).
6 You can now add a location to your group (or delete a
location from it).
You can also search for a location. Refer to the
instructions below.
Search
Refer to Steps 1 through 6, above.
To search for a location by name, keep pressing the Search
key until the location you want appears.
• Press Yes
ᮤ to add it to the group.
• Press No
ᮣ to delete it from the group.
Add
Refer to Steps 1 through 6, above.
To add a One Touch location:
1 Press the One Touch key.
2 Press Yes
ᮤ to add it to the group.
To add an Auto Dial location:
1 Press Auto Dial.
2 Enter the 2-digit Auto Dial number.
3 Press Yes
ᮤ to add it to the group.