Samsung 5400 User Manual
Page 61
|
Handbook
61
beginning of phone numbers you dial or program, and
automatically waits for a dial tone before dialing the rest of
the number.
!
Some PBX installations may require additional
adjustments to your fax machine. If you continue to
have difficulty with fax communication after following
these steps, contact your Authorized OKIFAX Dealer.
1 Press the Select Function key.
2 Press the 9/User Program One Touch key.
3 On the numeric keypad, press 2. The display shows
2:DIAL PARAMETER.
4 Press the Yes
ᮤ key until the display shows PBX LINE,
[OFF].
5 Press the No
ᮣ key. The display changes to PBX LINE,
[ON].
6 Press the Yes
ᮤ key until the display shows DIAL PREFIX,
[OFF].
7 Press the No
ᮣ key. The display changes to DIAL PREFIX,
[ ] ENTER 4DIGITS.
8 Using the numeric keypad, enter the number you normally
dial from your PBX to obtain an outside line. An example
of this is dialing 9 before the number, such as 9-555-1212.
9 Press the 14/Space One Touch key repeatedly until the
display changes.
10 Press the Yes
ᮤ key.
11 Press the Select Function key to finish. Keep in mind that
all of the outside telephone numbers you program into
your fax machine have to begin with your PBX’s access
digit.
!
To turn off the PBX LINE and DIAL PREFIX functions,
follow Steps 1-7 above. At Step 8, press the Space key
four times. Then skip to Step 10.