Samsung SWL-2200U - Manual (Page 13)

13
3. MagicLAN Installation For
Windows 98/ME/2000/XP/CE
We will explain the installation method for
SWL-2200U(Mini USB Adapter) .
3.1 Installation Overview
Here are some steps you will perform in establishing your wireless network connection:
1. Install the Access Point at first. AP is needed in case of Infrastructure network
mode.
2. You should install the Wireless LAN Card (SWL-2200U).
3. Install the software using the Installation CD.
4. Install the network protocol(s) required to communicate on your network. Most
likely you will need the TCP/IP protocol.
3.2 Installation Procedure of Windows 98
Please follow the following steps one by one to install the Mini USB Adapter successfully.
< Method 1 - Inserting card first >
1. Insert the Mini USB Adapter into the USB slot of your computer.
2. Add New Hardware Wizard appeared and the system looks for “ USB
Device ”. Press NEXT button and check if Search for the best driver for your
device(recommended) is slected and then press NEXT button . Insert the
MagicLAN Installation CD into the CD-ROM drive.
3. Mark the Specify a location tap and type “E:\Drivers” right below in this
tap(Where E is the CD-drive of your PC).