beautypg.com

Safety instructions the properly equipped operator – Shindaiwa 81704 User Manual

Page 3

background image

3

WARNING!

Use Good Judgment

ALWAYS wear eye protection to shield

against thrown objects.
NEVER run the engine when trans-

porting the unit.
NEVER run the engine indoors! Make

sure there is always good ventilation.

Fumes from engine exhaust can cause

serious injury or death.
ALWAYS clear your work area of trash

or hidden debris that could be thrown

back at you or toward a bystander.
ALWAYS use the proper cutting tool for

the job.
ALWAYS stop the engine immediately

if it suddenly begins to vibrate or shake.

Inspect for broken, missing or improp-

erly installed parts or attachments.
NEVER extend trimming line beyond

the length specified for your unit.
ALWAYS keep the unit as clean as

practical. Keep it free of loose vegeta-

tion, mud, etc.
ALWAYS hold the unit firmly with both

hands when cutting or trimming, and

maintain control at all times.
ALWAYS keep the handles clean.
ALWAYS disconnect the spark plug

wire before performing any mainte-

nance work.
ALWAYS, if a saw blade should bind

fast in a cut, shut off the engine imme-

diately. Push the branch or tree to ease

the bind and free the blade.

Safety Instructions

The Properly Equipped Operator

Always operate with both hands

firmly gripping the unit.

Wear close-fitting clothing to protect
legs and arms. Gloves offer added
protection and are strongly recom-
mended. Do not wear clothing or
jewelry that could get caught in
machinery
or underbrush.
Secure hair so it is
above shoulder
level. NEVER
wear shorts!

Wear hearing protection devices
and a broad-brimmed hat or hel-

met.

Always wear eye protection such as

goggles or safety glasses.

Keep away from the rotating

trimmer line or blade at all times, and

never lift a moving attachment above

waist-high.

Wear appropriate footwear (non-skid boots or
shoes): do not wear open-toed shoes or san-
dals.

Never operate the unit while barefoot!

Keep a proper footing and
do not overreach—main-

tain your balance at all
times during operation.

Always make sure the

appropriate cutting attachment

shield is correctly installed and in

good condition.

Figure 1

Always wear a shoulder strap or a harness when operating

a unit equipped with a blade.