SMC Networks SMC7004ABR V.2 - Manual (Page 20)

Configuring Client TCP/IP
16
7. Click the OK button to close the TCP/IP Properties window.
8. On the Network Properties Window, click the OK button to
save these new settings.
Note: Windows may ask you for the original Windows
installation disk or additional files. Check for the files at
c:\windows\options\cabs, or insert your Windows
CD-ROM into your CDROM drive and check the correct
file location, e.g., D:\win98, D:\win9x. (if D is the letter
of your CD-ROM drive).
9. Windows may prompt you to restart the PC. If so, click the Yes
button. If Windows does not prompt you to restart your
computer, do so to ensure your settings.
Obtain IP Settings from Your Barricade™ Router
Now that you have configured your computer to connect to your
Barricade™ Router, it needs to obtain new network settings. By
releasing old IP settings and renewing them with settings from
your Barricade™ Router, you will also verify that you have
configured your computer correctly.
1. Click Start/Run.
2. Type WINIPCFG and click
OK.