Sat - + ter, Option 3: power connect installation instructions – Sirius Satellite Radio SDSV6V1 User Manual
Page 47
47
Option 3: PowerConnect Installation Instructions
1 Insert your Stratus 6 into the
dock, aligning the radio against
the rear of the dock so that the
rails on the dock fit into the
mounting slots in the back of
the radio .
2 Power on Stratus 6 radio by
pressing the Power button .
3 Be sure the vehicle is outside
and the antenna has a clear
view of the sky . Verify that you
are receiving the SIRIUS signal . There should at
least be one bar on the upper right corner of the
main display screen that denotes antenna signal
strength . You can also press and hold menu and
then press
to scroll to and highlight Signal .
Press the Select button . The Satellite and
Terrestrial bars show the strength of the signal
being received . If the signal
reception is good, press and
hold menu to return to the main
display screen . You are ready to
make the audio connection .
jump
sel
S i g n a l
SAT - +
TER - +
jump
menu
sel