Sirius Satellite Radio SDSV6V1 - Manual (Page 45)

45
4 Power on your Stratus 6 by pressing the
Power button .
5 Be sure the vehicle is outside and the antenna
has a clear view of the sky . Verify that you are
receiving the SIRIUS signal . There should at
least be one bar on the upper right corner of
the main display screen that denotes antenna
signal strength . You can also press and hold menu and then press
to scroll to and highlight Signal . Press the Select button . The
Satellite and Terrestrial bars
show the strength of the signal
being received . If the signal
reception is good, press and
hold menu to return to the main
display screen .
6 Ensure that the Stratus 6 is tuned to channel 184 . Upon power
up, the Stratus 6 should tune to channel 184 by default, when it’s
not yet activated . If it’s not on channel 184, refer to “Listening to
Satellite Radio” on page 62 to learn about how to tune a channel .
7 If you haven’t done so, turn on your vehicle’s stereo system . Set it
to play input from the cassette source .
8 You should hear SIRIUS channel 184 through your vehicle’s stereo
system . You are now ready to activate your Stratus 6 .
9 The audio level output of the Stratus 6 can be increased or
decreased as necessary to match the audio levels of other sources
jump
sel
S i g n a l
SAT - +
TER - +