Sirius Satellite Radio SDSV6V1 - Manual (Page 22)

22
2 Attach the Rubber Tail to the antenna
and press the antenna cable into the
Rubber Tail . The Rubber Tail will help
to position the antenna the correct
distance from the edge of the roof or
trunk lid .
3 Clean the surface of the selected
mounting location using the alcohol
preparation pad and let it dry
thoroughly .
4 Follow the Tips and Cautions shown
on the next several pages, and place
the antenna in the location you
selected . Peel the protective material from the adhesive strips and
press the Rubber Tail firmly into place on the vehicle .
5 Continue to press firmly down on the Rubber Tail for another 30
seconds . At room temperature (68 ° F), maximum adhesion usually
occurs within 72 hours . During this period, avoid car washes and other
contact with the antenna and the Rubber Tail .
Vehicle Installation
Rubber
Antenna
Tail
Protective
Material
Strain
Relief
Antenna Cable
Magnetic Mount Antenna
(Upside-Down)