SMC Networks SMC EZ Connect g SMCWTK-G - Manual (Page 2)

The installation method makes the process as simple as possible.
1. Connect the SMCWTK-G to a PC using the Cat-5 Ethernet Cable.
2. Plug in the 4V power supply or use the supplied USB cable to
plug into an available USB port on the PC.
3. Insert the EZ Installation Wizard and Documentation CD.
4. Select “Install Utility”.
5. The Scan/Configuration Utility is now installed.
Go to “Start”, then “Programs”, select “SMC
802.11g Wireless Traveler’s Kit”, and then “SMC
802.11g Wireless Traveler’s Kit Configuration Utility”
to start the SMCWTK-G Scan/Configuration Utility
Program.
6. The Scan/Configuration automatically scans
for SMCWTK-G on the network.
7. Highlight the SMCWTK-G that you would like to
configure and click “Configure”. If your PC has the
same IP address subnet range as the SMCWTK-G,
then the login screen will appear. Enter the username
and password. The default IP address of the
SMCWTK-G is 192.168.2.25. The username is
“admin” and the password is “smcadmin”.
Skip to Step 10.
8. Make sure the PC has an IP address on the
192.168.2.xxx subnet, such as 192.168.2.30. If not, the
IP window will appear, as shown below. From this
window, set the static IP address of the PC to be in
the same subnet as the SMCWTK-G, e.g. 192.168.2.30.
Set the “Subnet Mask” to be “255.255.255.0”. Default
Gateway is usually the IP address of your router, e.g.
192.168.2.1. Click OK. Your PC may require a reboot
after changing the IP address. Click “Yes” to reboot
PC if prompted.
9. From Scan/Configuration Utility, select the
SMCWTK-G that you would like to configure and
click “Configure”. You will be asked to enter the
username and password to configure the SMCWTK-G.
By default, the username is “admin” and the pass-
word is “smcadmin”. Enter this information and
click OK.
10. The default mode of SMCWTK-G is Access Point
(AP) mode. To switch to Client, Repeater, Point-
to-Point Bridging (P2P), or Point-to-Multipoint
Bridging (PMP) mode, go to the Mode Page and
select the desired mode. Click Apply.
11. Then go to the Mode page and click Setup.
Configure the applicable properties for that mode,
such as the SSID, Channel, and Security.
12. The SMCWTK-G is now ready to use.
Get Connected
Features
Remote
Package Contents
System Requirements
Hardware Description
Unpack
1
2
Begin
3
Disable HTTP Proxy
Netscape
Explorer
Configuring your Macintosh
Configure TCP/IP Settings
Configure the Barricade g
Netscape
Explorer Explorer
Configuring your Macintosh
Configure TCP/IP Settings
Configure the Barricade g
Quick Installation Guide
EZ Connect™
g
Wireless
Traveler's Kit
SMCWTK-G
Hardware Installation
Using the EZ Ins sing the EZ Installation W allation Wiz izar ard Using the EZ Installation Wizard
SMCWTK-G
Get Connected
Features
Remote
Package Contents
System Requirements
Hardware Description
Unpack
1
2
Begin
3
Disable HTTP Proxy
Netscape
Explorer
Configuring your Macintosh
Configure TCP/IP Settings
Configure the Barricade g
Netscape
Explorer Explorer
Configuring your Macintosh
Configure TCP/IP Settings
Configure the Barricade g
Quick Ins Quick Installation Guide allation Guide Quick Installation Guide
EZ Connect™
g
Wireless
Traveler's Kit
EZ Connect™
g
Wireless
Traveler's Kit
SMCWTK-G
Hardware Installation
Using the EZ Installation Wizard
SMCWTK-G
Get Connected
Features
Remote
Package Contents
System Requirements
Hardware Description
Unpack
1
2
Begin
3
Disable HTTP Proxy
Netscape
Explorer
Configuring your Macintosh
Configure TCP/IP Settings
Configure the Barricade g
Netscape
Explorer Explorer
Configuring your Macintosh
Configure TCP/IP Settings
Configure the Barricade g
Quick Installation Guide
EZ Connect™
g
Wireless
Traveler's Kit
SMC SMCWTK WTK-G -G SMCWTK-G
Hardware Installation
Using the EZ Installation Wizard
SMCWTK-G
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no
responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third
parties, which may result from its use. No license is granted by implication or otherwise under any patent
or patent rights of SMC. SMC reserves the right to change specifications at any time without notice.
SMC Networks, Inc.
38 Tesla
Irvine, CA 92618
Copyright © SMC Networks, Inc., 2004. All rights reserved.
SMC is a registered trademark; EZ Connect and Barricade are trademarks of SMC Networks, Inc.
Other product and company names are trademarks or registered trademarks of their respective holders.