Sherwood R-903 User Manual

Page 37

ENGLISH

• The audio signal from the AUX and the video signal

from the VIDEO 2 will be dubbed and you can
enjoy them on the TV set and from the speakers.

Start recording on the VIDEO 1.

Start play on the AUX and the VIDEO 2
respectively.

DIGITAL AUDIO RECORDING WITH MD RECORDER

For digital recording, select the desired
digital input as recording signal input.

Select a desired input of AUX, VIDEO
1~3 as a recording source.

Start recording on the component
connected to OPTICAL DIGITAL OUT.

• Only when the OPTICAL DIGITAL OUT of this receiver is connected to the OPTICAL DIGITAL IN of the MD recorder or CD

recorder, you can enjoy high-quality sound of digital recording without converting the original signals. Refer to “
CONNECTING AUDIO COMPONENTS”/ “ CONNECTING VEDIO COMPONENTS”/“CONNECTING DIGITAL INs and OUT”
on page 6~7 and the operating instructions of the MD recorder or CD recorder.

Notes:

• Digital recording is available for the digital audio program sources such as CDs, MDs, some DVDs, etc.
• In most DVDs as well as some CDs, etc., digital recording may not be available depending on the signal format.
• There are some restrictions on recording digital signals. When making digital recordings, refer to the operating instructions of

your digital recording equipment to know what restrictions are imposed.

Start play on the desired input.

• Each time this button is pressed, the corresponding

input is selected as follows:

A(nalog)

o(ptical) 1

o(ptical) 2

c(oaxial) 1

Note : When the selected digital input is not

connected, “DIGITAL” indicator flickers.
There will be no recording as well as no sound.

DIGITAL INPUT

AM/FM MODE

INPUT SELECTOR

AUX

VIDEO1
VIDEO2
VIDEO3

If you select AUX for hearing and VIDEO 1 for seeing, whenever you select AUX, the VIDEO 1 is selected
automatically as video input source. So you are sure to be observe the order and doing of the above steps 1 and 2.