Sherwood R-903 - Manual (Page 31)

ENGLISH
30
Downmixing into 2 front channels
• To cancel the 2 - CH downmix mode, select the
desired surround mode with the DSP MODE DOWN
(
) or UP( ) button.
• When the playback of the source on the player is
stopped, interrupted, etc., the 2 - CH downmix mode
is not canceled even though “ ST” and the DTS or
Dolby Digital indicators go off.
• If the headphones are plugged while the digital
signals from the DTS, Dolby Digital or MPEG
program sources are being input, it will enter the 2-
CH downmix mode automatically and if the
headphones are unplugged in the 2-CH downmix
mode, it will return to the previous mode.
• Allows the multi - channel DTS, Dolby Digital or
MPEG signal to be reproduced through only two
speakers or through headphones.
• When the digital signals from the DTS, Dolby Digital
or MPEG program sources are input in available
surround mode, press the STEREO button.
• “ST” indicator lights up and “2 CH DOWNMIX” is
scrolled, meaning it enters the 2-CH downmix mode,
and then the discrete multi-channels(except LFE) are
mixed down into 2 front channels.
STEREO