Sherwood R-903 - Manual (Page 32)

31
LISTENING TO RADIO BROADCASTS
• Each time this button is pressed, the mode changes
as follows;
Tuning mode : “PRESET” goes off.
Preset mode : “PRESET” lights up.
Manual tuning is useful when you already know the
frequency of the desired station.
Manual tuning
Select the tuning mode.
1
Press the below button repeatedly until the
right frequency has been reached. 2
DECODING
TUNE MODE
DECODING
TUNE MODE
or
ADJUST
TUNING/PRESET
Auto tuning
Select the tuning mode.
1
Press the below button for more than 0.5
second.
2
• Each time this button is pressed, the band is changed
as follows:
FM STEREO FM MONO AM
• When FM stereo broadcasts are poor because of weak
broadcast signals, select the FM mono mode to reduce
the noise, the FM broadcasts are reduced in monaural
sound.
To select the tuner,
To select the desired band
DIGITAL INPUT
AM/FM MODE
BAND FREQUENCY
• The tuner will now search until a station of sufficient
strength has been found. The display shows the tuned
frequency and “TUNED”.
• If the station found is not the desired one, simply
repeat this operation.
• Weak stations are skipped during auto tuning.
• When pressing the TUNE +/- buttons on the remote
control, you need not select the tuning mode on step 1.
TUNER
TUNE
-, +
or
ADJUST
TUNING/PRESET
TUNE
-, +
ENGLISH
INPUT SELECTOR
or