Pin assignment d-sub (15-pin), Error handling – Siemens 175V User Manual
Page 25
Color monitor 175V
A26361-K609-Z100-2-5E19
English - 17
Pin assignment D-SUB (15-pin)
1
5
6
10
11
15
Pin
Meaning
Pin
Meaning
1
Red video input
9
not connected
2
Green video input
10
Logic ground
3
Blue video input
11
Ground
4
Ground
12
DDC data (SDA)
5
DDC Return
13
H. sync
6
Red video ground
14
V. sync
7
Green video ground
15
DDC Clock
8
Blue video ground
(SCL)
Error handling
Should an error occur, first check the following points. If the distortion is still not eliminated, the
monitor should, if possible, be checked on another PC.
If you cannot solve the problem, contact our Help Desk.
The screen display is too small or not centered
The monitor recognizes an undefined mode (see "
").
Ê
Adjust the position and the size of the display and save your settings (see "
monitor
").
Colors are impure or shifted
Ê
Degauss the monitor (see "
").
Ê
Ensure that there are no devices or objects near the monitor which generate magnetic fields (e.
g. loudspeakers).
The screen display is flickering
Ê
Set an ergonomic refresh rate (
≥
75 Hz) using the PC software (see documentation for your PC
or your screen controller/graphics card).
Ê
Ensure that the monitor is kept at a distance of at least 30 cm from other monitors of the same
construction type. With different monitors, the distance must be increased, if necessary.