Siemens 175V - Manual (Page 24)

Color monitor 175V
16 - English A26361-K609-Z100-2-5E19
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications interface
between the monitor and the PC. If your PC is equipped with a VESA-DDC-compatible VGA
interface, it can automatically read the data for ensuring optimum operation from your monitor and
select the appropriate settings.
i
If the monitor 175V is not yet displayed in the list of monitors, you can select one of the
following monitors instead:
Fujitsu Siemens, Siemens or Siemens Nixdorf MCM 173V, MCM 171V, MCM 1510 NTD,
MCM 1508, MCM 1755, MCM 1503
Preset operating modes
i
The display position and size have been set to optimum values at the factory for the
operating modes listed above. Depending on the screen controller used, it may be
necessary to adjust the display position and size. In this case, you can change and save
the settings (see "
Operation of the monitor ").
Horizontal frequency Refresh rate Screen resolution
31.5 kHz
31.5 kHz
37.8 kHz
43.3 kHz
50.6 kHz
53.7 kHz
60.0 kHz
63.9 kHz
68.7 kHz 70 Hz
60 Hz
100 Hz
85 Hz
110 Hz
85 Hz
100 Hz
75 Hz
85 Hz
720 x 400
640 x 480
720 x 400
640 x 480
640 x 480
800 x 600
1024 x 768
800 x 600
1024 x 768
For ergonomic reasons we recommend a refresh rate of at least 75 Hz and a maximum resolution of
800 x 600 pixels.