Siemens 175V - Manual (Page 19)

Color monitor 175V
A26361-K609-Z100-2-5E19 English - 11
Changing the monitor settings
With the buttons on the control panel, call up and use the integrated OSD (On-Screen Display)
menu.
1 2 3 4
I
EXIT MENU
1 = EXIT button
2 =
! button (brightness)
3 = " button (contrast)
4 = MENU button
Settings with the OSD menu
To set the OSD menu, perform the following steps:
Ê Press the MENU button to activate the OSD menu.
The main menu appears on the screen with icons for the setting functions.
H: 68.8KHz V: 85Hz
Contrast
70
EXIT
6500 9300
For preset modes you will find information about
the resolution and refresh rate in the top line.
For all not preset modes, the horizontal
frequency and refresh rate are displayed.
Ê Press the ! or " button to select the icon
you want.
The marked icon turns red.
Ê Press the MENU button to select the
highlighted icon.
(If you wish to exit the OSD menu, select
EXIT ).
Depending on the function, a window with a setting range or a selection menu is displayed.
Ê Press the ! key or the " key to define the setting.
All changes are stored automatically. The OSD menu disappears after 10 seconds. The OSD menu
can be hidden beforehand by choosing
EXIT or pressing the EXIT button.