Samsung HT-DM150 - Manual (Page 14)

Connecting your System to the Power Supply
Controlling a TV with the Remote
You can use the remote control to operate other manufactures’ TV.
13
1
Turn on the TV.
2
Point the DVD’s remote at the TV.
• Manufacturers’ codes are subject to change without notice. If they are changed, this
remote control cannot operate the equipment.
4
If the TV turns off, setup is complete.
• Now, you can perform the following
operations on the TV.
3
While holding the button
down, enter the code for your brand.
TV
example : For SAMSUNG 1TVs
While holding down the
button,
TV
• If there is more than one code listed in the
table, enter one at a time to determine which
code works.
TV : Turn on or off the TV.
VOLUME +/– : Adjust the volume.
TV/VIDEO : Set the input mode (either TV or VIDEO)
CHANNEL +/– : Change the channels.
The main lead must be plugged into an appropriate socket.
Before plugging your system into a main socket, you must check the voltage.
Check the position of the voltage selector on the rear of the system (OPTIONAL).
1. Plug the main lead (marked AC Cord on the rear of the system) into an appropriate socket.
2. Press the On/Standby button to switch your DVD Player system on.
Manufacturer
01,14,15,23
19
21
10
11
06,08,18
28
04
24
13
25
12
07,29
05,20
02,16,22
03
09
17
Samsung
Daewoo
Emerson
Hitachi
JVC
LG
Loewe
Magnavox
Matsushita
Mitsubishi
Noblex
Panasonic
Rca
Sanyo
Sharp
Sony
Toshiba
Zenith
CODES
Option 1
Manufacturer
01~06,32
12
12
09,17,21
11,13,14,24
32
02,30
02,16
29
23
13,14,24
08,23~27
02,20,22
13,14,22~24
12,16
02
10,31
15,16
14,24,28
13,14,24,33,34
07,16~19,21
Samsung
Akai
FIisher
Grundig
Hitachi
JVC
LG
Mitsubishi
Mival
Nokia
Nordmende
Panasonic
Philips
Saba
Sanyo
Schneider
Sharp
Sony
Telefunken
Thomson
Toshiba
CODES
Option 2