beautypg.com

SMC Networks EZ Networking SMC2209USB/ETH User Manual

Page 8

background image

Step 8: You will then be prompted to reboot the machine. Press [Yes]. Upon reboot, the

SMC2209USB/ETH will be initialized and ready for use.

Section 5.2 |Windows Me

NOTE: Installation processes will require the use of your original, licensed copy of Windows.

Please have your Windows CD available BEFORE proceeding with the installation.

Step 1: After you have inserted the SMC2209USB/ETH in your machine and turned it back on,
the OS will automatically recognize the adapter and prompt you for the appropriate drivers.

Select the [Specify the location of the driver] option. Then click the [Next >] button to begin the

installation.

Step 2: Insert the Driver CD and select the [Specify a location:] option. Clear the [Removable
Media] checkbox. Then press the [Browse] button and look for the drivers on your CD. This

should be located in the root directory - ?:\. (Note: The ? equals the letter of your CD-ROM drive.

In most cases, this is D.) Then click [Next >].

Step 3: The system should find the drivers. Click the [Next >] button to continue the installation.

(Note: If the system could not find the drivers, click the [< Back] button, and select the [Display

a list of all the drivers] option. Select [Network Adapters] from the list of devices, press [Have
Disk] and once again browse to the location of the drivers)

Step 4: Once all the necessary files have been copied, the driver installation is complete. Click

[Finish] to exit the wizard.

Step 5: You will then be prompted to reboot the machine. Press [Yes]. Upon reboot, the

SMC2209USB/ETH will be initialized and ready for use.