Sirius Satellite Radio XTR8CK - Manual (Page 13)

Mounting to the Dashboard or Console
Note: Use only the appropriate XACT accessories or input devices with your receiver. Use only the 12v
Vehicle Adapter that is provided with the kit. It is important that you do not modify it in any way as this
may result in damage to your equipment and void the warranty.
If using the AAMPs mounting holes to fasten the Vehicle Mount to your vehicle, Bolt or screw the Vehicle
Mount in place and proceed to step
2.
1. Remove the protective film
from one side of the supplied
double sided 3M tape. Press
firmly to secure the tape to the
bottom of the Vehicle
Mount. (figure 1).
2. Slide the XACT Sirius Satellite
Radio Receiver (figure 2) onto
the mounting tab of the Vehicle
Mount until it engages.
(figure 3).
3. Connect the DC Power,antenna
and audio (if required) to the
appropriate jacks. (figure 4).
INSTALLATION
4.
3.
2. 1.
9
USING THE VEHICLE KIT