Sony ZS-M7 - Manual (Page 32)

Editing recorded tracks on the MD
32 GB
Erasing recordings (Erase Function) (continued)
Note
After you
stop
recording,
do not disconnect the
AC power cord or
move the player
while “TOC EDIT” is
flashing in the
display. If you do so,
recording may not be
done properly.
Erasing all tracks on an MD
You can erase the disc name, all recorded tracks and
their names at the same time. After you have erased
all tracks on the MD, you can use it as a new MD.
1
While the player is stopped, press EDIT repeatedly
until “All Erase” appears in the display.
2
Press ENTER•YES.
“Erase OK?” appears in the display. Once you
have erased a track, you cannot recover it. Be sure
to check the contents of the track you are trying to
erase.
If you want to cancel the erase function at this
point:
Press CANCEL•NO or MD p.
3
Press ENTER•YES.
After “TOC EDIT” disappears from the display,
“Blank Disc” appears in the display, and all
contents on the MD are erased.