To change the speaker cables – Sony DAV-SC8 User Manual

Page 15

Text mode
Original mode

Ge
tting Star

To change the speaker cables

If you want to use a different speaker cable, you can detach the plug for attachment to another cable.

Detaching

With the catcher facing down, press and hold the plug down against a flat surface and remove the cords
from plug.

Attaching

While pressing the plug down against a flat surface, insert the new speaker cords.
Note that the cord marked with a line should be attached to the minus (-) side of the plug.

Note

Be careful not to damage the surface you use (desk, etc.) when attaching/detaching the speaker cords.

Tips

• You can use any commercially sold speaker cable of gauge cord AWG #18 - AWG #24.

• Before attaching a new cable, strip off 10 mm ( 13/32 in.) of its insulation and twist the bare wires of both cords.

Catcher

10 mm