SVAT Electronics GX5400 - Manual (Page 16)

15
POWER ON SETUP
1 CF AUTO REPAIR: CF auto repair on/off during power on.
2 RF CHANNEL: RF channel selection during power on.
3 SPK VOLUME: Speaker volume setup during power on.
4 LCD: LCD on/off during power on
RETURN TO FACTORY DEFAULT VALUE
TROUBLESHOOTING
A Power
Q: Why are there no images after power-on?
A: a. Power LED is unlit: indicates power failure or insufficient power.
b. Power LED is lit: please check the input source (camera or AV).
When RF input source is used, please make sure that the camera
and the main device have been setup to the same channel. When
AV IN input source is used, please make sure that the AV line is
properly connected to the camera (Video/ Audio terminal);
otherwise check the camera video output line connections.
Q: Which type of batteries to choose from?
A: Please use nickel metal hydride (NiMh) or alkaline batteries for the
power supply.
B Camera
Q: Why does video interference occur when using wireless IR camera?
A: a. Please make a channel adjustment, make sure that the camera
GX5400: 2.4GHz Wireless Digital Video Recording System