Sirius Satellite Radio SIR-SL1C User Manual
Page 17
Streamer GT SIR-SL1C User Guide
17
Setting Channel Presets
You can store up to 30 of your favorite channels as
presets, for quick access. Presets are stored in 5 banks,
each containing 6 channel presets.
1. Press the BAND button to activate the preset bank
you want. The selected bank is shown in the top
right corner of the Default screen.
2. Select the channel you want to preset (see the Basic
Operation
and Changing Channels section).
3. Hold the numbered preset button you want to store
the channel in for at least 2 seconds.
• You will hear a beep and “Preset Stored” will flash to
indicate that the channel has been memorized.
• If the preset button already has a channel stored in
it, it will be replaced by the new channel.
Recalling Channel Presets
The 6 presets in the active bank (A - E) can be selected
by pressing the “0” - “6” buttons.
1. Press the BAND button to activate the preset bank
you want. The selected bank is shown in the top
right corner of the Default screen.
2. Press the desired preset button to recall the preset.
The channel will change and the display will revert to
the Default screen for the new channel.
Direct Tuning (Remote Control Only)
Channels can be directly accessed by pressing the
DIRECT button on the remote control and then using
the 0-9 keys to enter the desired channel number.
Once the desired number has been entered, the
channel will change and the display will revert to the
Default screen for the new channel. The receiver will
change immediately if three numbers are entered (ex.
“0”, ”0”, “7”), but if just one or two digits are entered,
the unit will wait for 3 seconds before changing the
channel.