Socket Mobile Ethernet Blaster Communications Cable - Manual (Page 24)

2–2 Chapter 2: EthernetBlaster Communications Cable Administration
Managing Passwords
EthernetBlaster Communications Cable User Guide © June 2008 Altera Corporation
2. Click the Change Admin Password tab. See Figure 2–1 below.
3. Enter the new administrative password in the New Password field and again in
the Confirm New Password field. Click Apply.
The new password takes effect immediately when logging back into the
administrative web page.
1 The EthernetBlaster communications cable does not restart when the administrative
password is reset.
Changing the Quartus II Remote Connection Password
To change the Quartus II remote connection password, follow the directions below:
1. Open and log into the EthernetBlaster administrative web page in your browser.
1
See “Cable Setup” on page 1–4 for instructions on accessing the administrative web
page using your specific connection.
2. Click the Change EthernetBlaster Settings tab. See Figure 2–2 below.
Figure 2–1. Change Admin Password Page