Sony LMD-2140MD - Manual (Page 24)

Attaching the Input Adaptor / Selecting the Default Settings
24
Attaching the Input
Adaptor
Before attaching the input adaptor, disconnect the power
cord.
Attach the input adaptor to the optional input slot after
removing the panel of the slot.
1
Remove the panel of the optional input slot.
2
Insert the input adaptor into the slot.
3
Tighten the screws.
Selecting the Default
Settings
When you turn on the unit for the first time after
purchasing it, select the area where you intend to use this
unit from among the options.
The default setting values for each area
INPUT
MONITO R OUT
INPUT
MONITO R OUT
COLOR
TEMP
COMP
LEVEL NTSC
SETUP
1 NORTH AMERICA Low BETA7.5 7.5
2 LATIN AMERICA
PAL&PAL-N AREA
ARGENTINA Low SMPTE 0
PARAGUAY Low SMPTE 0
URUGUAY Low SMPTE 0
NTSC&PAL-M AREA OTHER AREA Low BETA7.5 7.5
3 AFRICA AUSTRALASIA
EUROPE MIDDLE-EAST
Low SMPTE 0
4 ASIA EXCEPT JAPAN
NTSC AREA Low BETA7.5 7.5
PAL AREA Low SMPTE 0
5 JAPAN High SMPTE 0
3
3
4
5
3
1
2
+
–
+
–
MENU ENTER INPUT
R
USER MEMORY +
–
+
–
-