Sony LBT-ZUX9 - Manual (Page 36)

36 US
Adjusting the sound
You can reinforce the bass and create a
more powerful sound.
Press GROOVE repeatedly.
GROOVE ON* t Z-GROOVE ON* t
GROOVE OFF t GROOVE ON t …
* The volume switches to power mode and the
equalizer curve changes.
Tip
The default setting is “GROOVE ON”.
Press one of the preset effect
buttons to select the preset effect
you want.
Press USER EQ repeatedly to
select one of the user equalizer
setting.
You can also press EQ on the
remote repeatedly.
Preset effect options
“SUR” lights up in the display if you
select an effect with surround effects.
Adjusting the graphic equalizer or
selecting the surround effect and
storing the user equalizer setting
You can adjust the sound by raising or
lowering the level of specific frequency
band or selecting the surround effect, then
store up to three user equalizer settings in
the memory.
1
Press EQ BAND/MEMORY
repeatedly to select a frequency
band or surround effect setting.
2
Turn OPERATION DIAL to adjust
the level or select the surround
effect you want.
Sound Adjustment
Reinforcing the sound
Selecting the preset effect
Effect Category
ROCK, POP,
JAZZ, DANCE,
SAMBA,
REGGAE,
HIP HOP,
TECHNO Standard audio sources
FLAT Original audio source
(cancel the preset effect)
USER EQ 1,
USER EQ 2,
USER EQ 3 User equalizer setting
(see “Adjusting the
graphic equalizer or
selecting the surround
effect and storing the
user equalizer setting”
below)
Frequency band Equalizer level