Star Micronics NP-225 - Manual (Page 5)

2
1.3 Configuration
The printer consists of the following components.
Product Name
Description Specification Part No. Q’ty
NP-215 NP-225 NP-325 NP-415W
NP-215 1 X
NP-225 1 X
NP-325 1 X
Printer
NP-415W 1 X
60x Ø 48mm 24-X117 1 X X
80x Ø 48mm 24-X121 1 X Thermal paper
112x Ø 48mm 24-X116 1 X
80R 35-029Q 1 X
Paper holder
80L 35-030Q 1 X
Screws tight 21-U196 2 X
B501power
cable
D-P44507 30-439A 1
X X X X
*B501 power cable : D type only
2. Specifications
2.1 Basic specifications
No. Specifications NP-215/225 NP-325 NP-415W
1. Print method Line thermal dot
Е Е
2. Total dots / line 432 dots 576 dots 832 dots
3. Dot density 8 dots / mm Е Е
4. Print width 54 mm 72 mm 104 mm
5. Print speed (Max.)
*It can be changed by the
condition. 85 mm / s
1 partition drive
(ASCII print)
70 mm / s
1 partition drive
(ASCII print)
70 mm / s
Automatic partition
drive (ASCII 38 print)
6. Print digits
Font A (12 24)
Font B (9 17) 36 digits (Font A)
48 digits (Font B) 48 digits (Font A)
64 digits (Font B) 69 digits (Font A)
92 digits (Font B)
1 Print specs.
7. Line feed pitch 0.125 mm Е Е
1. Character size
Font A (12 24)
Font B (9 17) 1.50 3.00 mm
1.13 2.13 mm Е
Е
Е
Е
2. Character types
ASCII 224
Е Е
Block graphics 80 2
Е Е
International 32
Е Е
2 Character
specs.
3. Character modification Double width
Е Е
Vertical double
Е Е
Quadruple
Е Е
Bold
Е Е
Double strike
Е Е
Inverted
Е Е
90°clockwise rotation
Black/white reverse
Underline
Е
Е
Е
Е
Е
Е
4. Line spacing (Default) 4.25 mm (1/6 inch)
Е Е
ANK mode Е Е
Bit image mode Е Е
3 Print mode
Barcode mode Е Е
1-D symbology UPC-A
UPC-E Е
Е
Е
Е
EAN-13 (JAN-13)
Е Е
EAN-8 (JAN-8)
Е Е
CODE39
Е Е
4 Barcode
specs
ITF
Е Е