29 voice dialling, 29 voice control, Voice control – Sony Ericsson K608i User Manual
Page 29
29
Calling
Voice control
With your phone, you can use your voice to:
• Voice dial – call someone by saying the name.
• Activate voice control by saying a “magic word”.
• Answer and reject calls when using a handsfree kit.
Voice commands can only be saved in the internal
phone memory, not on the SIM card. When
recording, make sure that you are in a quiet
environment and try to use names that are distinct
from each other,
Voice dialling
You can voice dial by saying a pre-recorded voice
command. Start voice dialling from standby using
the phone, a portable handsfree, a Bluetooth
headset or by saying your magic word.
You must first activate the voice dialling
function and record your voice commands. An icon
appears next to a phone number that has a voice
command.
To activate voice dialling and
record names
1 }
Settings
}
the
General
tab
}
Voice control
}
Voice dialling
}
Activate
}
Yes
}
New voice
}
Add
and select a contact.
2
If the contact has more than one number, use
and
to view the numbers. Select the
phone number to which you want to add the
voice command. Now you are going to record
a voice command such as “John mobile” for
the phone number you selected.
3
Instructions appear. Wait for the tone and say
the command that you want to record. The
voice command is played back to you.
4
If the recording sounds ok
}
Yes
. If not
}
No
and repeat step 3.
5
To record another voice command for a contact
} New voice }
Add
again and repeat steps 2-4
above.
To make a call from the phone
1
From standby, press and hold one of the
volume buttons.
2
Wait for the tone and say the name you
recorded earlier, for example “John mobile”.
The name is played back to you and the call is
connected.
To make a call with a handsfree
From standby, press the handsfree button, or the
Bluetooth headset button.
This is the Internet version of the user's guide. © Print only for private use.