Sharp Conference Series XG-V10WU - Manual (Page 57)

E-56
Basic Operation
Selecting the Economy Mode
ID No. Display Off Function
The LED ID number display on the rear of the projector,
used when controlling multiple projectors, can be turned
on or off.
Description of ID No. Display
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select “Options (1)”.
3 Press ∂/ƒ to select “ID No. Display”, and then
press ©.
4 Press ∂/ƒ to select “Display Off”, “Standby
Off” or “Display On”.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
Projector Remote Control
1.2.3 4.5.6
1, 6
5
2, 3, 4
(GUI) On-screen Display
Reversing/Inverting Projected Images
This projector is equipped with a reverse/invert image
function which allows you to reverse or invert the pro-
jected image for various applications.
Description of Projected Images
Selected item
Front
Ceiling םFront
Rear
Ceiling םRear
Description
Normal image
Inverted image
Reversed image
Reversed and inverted image
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select “Options (2)”.
3 Press ∂/ƒ to select “PRJ Mode”, and then press
©
.
4 Press ∂/ƒ to select the desired projection mode.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
Projector
MOUSE ADJ.
Remote Control
1.2.3 4.5.6
1, 6
5
2, 3, 4
(GUI) On-screen Display
Display Off Not displayed
Selected item Description
Displayed except when the projector is
in standby mode.
Always displayed
Standby Off
Display On
MOUSE ADJ.
• This function is used for the reversed image and ceiling-
mount setups. See page 30 for these setups.