Scag Power Equipment SW - Manual (Page 5)

1
GENERAL INFORMATION
INTRODUCTION
Your mower was built to the highest standards in the
industry. However, the prolonged life and maximum
efficiency of your mower depends on you following the
operating, maintenance and adjustment instructions in this
manual.
If additional information or service is needed, contact
your Scag Power Equipment Dealer.
We encourage you to contact your dealer for repairs. All
Scag dealers are informed of the latest methods to
service this equipment and provide prompt and efficient
service in the field or at their service shop. They carry a
full line of Scag service parts.
USE OF OTHER THAN ORIGINAL SCAG
REPLACEMENT PARTS WILL VOID THE
WARRANTY.
For pictorial clarity, some illustrations and figures in this
manual may show shields, guards or plates open or
removed. Under no circumstances should your mower be
operated without these devices in place.
All information is based upon product information
available at the time of approval for printing. Scag
Power Equipment reserves the right to make
changes at any time without notice and without
incurring any obligation.
WARNING
FALLING HAZARD
USE ONLY SCAG APPROVED
RIDING ATTACHMENTS
SEE OPERATOR'S MANUAL 481109
USE ONLY SCAG APPROVED ATTACHMENTS
AND ACCESSORIES.
Attachments and accessories manufactured by
companies other than Scag Power Equipment are not
approved for use on this machine. Using unapproved
attachments, (especially "stand-up" riding attachments)
may be hazardous.
GC-F4 (p/n 9002)
GC-4D (p/n 9001)
Mulch Plate (p/n 9258, 9259, 9260, 9261)
Hurricane Mulch System (p/n 9263, 9264, 9265, 9266)
Cup Holder (p/n 9240)
Hour Meter (p/n 48023)
Turbo Baffle (p/n 423955, 423956, 423957)
Blade Buddy (p/n 9212)
Flat-Free Caster Tires (p/n 9275)
SCAG APPROVED ATTACHMENTS AND
ACCESSORIES:
SERVICING THE ENGINE
The detailed servicing and repair of the engine is not
covered in this manual; only routine maintenance and
general service instructions are provided. For service of
the engine during the limited warranty period, it is
important to contact your Scag dealer or find a local
authorized servicing agent of the engine manufacturer.
Any unauthorized work done on the engine during the
warranty period may void your warranty.
DIRECTION REFERENCE
The “Right” and “Left”, “Front” and “Rear” of the
machine are referenced from the operator’s right and left
when standing in the normal operating position and facing
the forward travel direction.