Sharp CV-2P10SC - Manual (Page 9)

EN-7
ENGLISH
Exhaust hose
1
Rain guard
2
Window adapter
1
Insect guard net
1
Bracket
1
Foam seal A
1
Screw
8
Foam seal B
(adhesive type)
1
Window kit Manual
1
Remote control
1
Battery
(AAA.1.5V)
2
SUGGESTED TOOLS FOR WINDOW PANEL INSTALLATION
1. Screwdriver(medium size Phillips) 2. Tape measure or ruler 3. Knife or scissors
4. Saw (In the event that the window panel needs to be cut down in size because the win-
dow is too narrow for direct installation.)
MIN.12"
(30cm)
MIN.12"
(30cm)
MIN.12"
(30cm)
• The unit should be placed on a firm foundation to
minimize noise and vibration. For safe and secure
positioning, place the unit on a smooth, level floor
strong enough to support the unit. This will also help
to avoid water spilling out into the room.
• The unit has casters to aid placement, but it should
only be rolled on smooth, flat surfaces. Use caution
when rolling on carpet surfaces. Do not attempt to roll
the unit over objects.
• The unit must be placed within reach of a properly
rated grounded socket.
• Never place any obstacles around the air inlet or out-
let of the unit.
• Allow at least 12" (30cm) of space from the wall for
efficient air-conditioning.
Window panel
Exhaust cover
Adjustment panel Extension panel
LOCATION
INCLUDED
CV-2P10SC_en.indd 7 11.3.22 11:00:12 AM