Sharp CV-2P10SC - Manual (Page 23)

EN-21
ENGLISH
MAX COOL OPERATION
The unit fan works at extra high speed with a setting temperature of 59°F.
1
Press the MAX COOL button during cool-
ing mode.
• The remote control will display " ".
• The temperature display will go off.
• The red MAXIMUM lamp will light.
TO CANCEL
Press the MAX COOL button again.
• The red MAXIMUM lamp will turn off.
NOTES:
• You cannot set the temperature or fan speed during MAX
COOL operation.
• The fan returns to the HIGH speed setting after the unit has
run for 30 minutes in MAX COOL mode.
• The extra high fan speed may automatically slow down to protect the unit.
• MAX COOL operation and SLEEP operation can not be used together.
SLEEP OPERATION
When SLEEP operation is set, the temperature setting is automatically adjusted to prevent
the room from becoming too cold.
1
Press the SLEEP button during cooling
mode.
• The remote control displays “ ”.
• The orange TIMER lamp will light.
• The unit will stop operating after 8 hours.
• The fan speed setting is set to AUTO.
TO CANCEL
Press the SLEEP button.
• The orange TIMER lamp will turn off.
NOTES:
• One hour after the SLEEP operation is started, the tempera-
ture setting rises by 2˚F and after another hour it rises by an
additional 2˚F. Temperature display on the remote control will
not change from its original setting.
• SLEEP operation and MAX COOL operation can not be used
together.
• The OFF TIMER, ON TIMER and SLEEP operation can not
be set together. Only the most recent settings will be used.
2˚F
2˚F
8hours
1hour 1hour
Start of SLEEP operation Unit shuts off
1
1
CV-2P10SC_en.indd 21 11.3.22 11:00:17 AM