SpectraLink 150 M3 MCU - Manual (Page 55)

SpectraLink Corporation Link WTS Installation and Operation
Part Number: 72-0075-01-C-W.doc Page 44
12.4 Examples of Programming
Transfer:
On your telephone system, the Transfer feature is accessed using Flash * 7 . On the
Wireless Telephone, Transfer will be accessed using FCN 2.
With the Mode switch in the ADMIN position, key in the following sequence on the
Administrative Wireless Telephone:
START,FCN, 2
START(flash),*,7,END
Speed Dial:
You want FCN 4 to dial 555-1234. The system must access an outside line by dialing 9
and wait for dial tone, then dial the call. Key in the following sequence on the
Administrative Wireless Telephone:
START,FCN,4
9,FCN(pause),FCN(pause),5,5,5,1,2,3,4,END
The number of pause entries depends upon how quickly your telephone system
accesses outside dial tone.
Clear or Erase A Function:
You want to clear FCN 5 from memory. Key in the following:
START,FCN,5,END
Remember that when you change or delete a function using the Administrative Wireless
Telephone, you will change or delete that function on all Wireless Telephones.