SpectraLink 150 M3 MCU - Manual (Page 48)

SpectraLink Corporation Link WTS Installation and Operation
Part Number: 72-0075-01-C-W.doc Page 37
8.6 Replace a Base Station
To replace a Base Station, unplug the existing Base Station and plug in the new Base
Station.
•
The LED will blink red and green as the system software downloads to the Base
Station and the Base Station is tested.
•
When the LED blinks amber, the system is ready for operation.
•
When the LED blinks green, a Wireless Telephone has established a radio link with
that Base Station.
•
If the LED turns solid red, there should be an error message on the MCU's status
LEDs and the MCU Error LED should be lit.