Sanyo Xacti VPC-SH1 - Manual (Page 86)

65
English
SPECIFICATIONS
Sensitivity Still image shooting (standard output sensitivity*)/
video clip recording mode:
Auto (video clip recording: ISO 50 to 1600; still
image shooting: ISO 50 to 400)/ISO 50, ISO 100,
ISO 200, ISO 400, ISO 800, ISO 1600, and
ISO 3200 (switchable from the Recording Menu)
h Sensitivity measured in compliance with the
ISO standard (ISO 12232:2006).
h Maximum ISO sensitivity up to 2400 equivalent
when Scene Select function is set to Q.
h Recorded at ISO 2400 in the video clip
recording mode, even if ISO sensitivity setting
is z.
Minimum subject
illumination Approx. 10 lux (1/30 sec in the scene select AUTO
mode)
Approx. 4 lux (1/15 sec in the HIGH SENSITIVITY or
lamp mode)
Image stabilizer Video: Electronic
Still image: Multi-calculation electronic
Monitor 2.7" (6.9 cm) low-temperature polysilicon TFT color
wide liquid crystal (transmissive), approx.
230,000 pixels
Flash working
range GN = 4.0
Approx. 50 cm (19.69 in.) to 2.3 m (7.55 ft.) (wide)
Approx. 1 m (3.28 ft.) to 2 m (6.56 ft.) (tele)
Flash modes Auto-flash, forced flash, flash off
Focus TTL-type AF (still image shooting mode: 9-point
range finder/spot focus; video clip recording mode:
Continuous focus), manual focus
Self-timer Approx. 2-second delay, 10-second delay
Ambient
environment Temperature 0 to 40 °C (32 to 104°F) (operation)
0 to 35 °C (32 to 95°F) (when
charging)
–20 to 60 °C (–4 to 140°F) (storage)
Humidity 30 to 90% (operating, no
condensation)
10 to 90% (storage, no
condensation)