Sanyo Xacti VPC-SH1 - Manual (Page 33)

English
12
SE
TU
P
INSTALLING THE CARD
Be sure to format a newly purchased card or one that was used in another
device before using it in your camera (page 13). If an unformatted card is
used, the card itself may become unusable.
Your camera has an internal memory, so you can record without a card
installed.
Monitor unit
1 Open
Card slot cover
2 Pull and rotate
Card slot
Card
3 Insert
4 Insert the card until it
clicks into place
i After inserting the card,
colse the card slot cover.
To extract the card...
i Press the card in once, and then
release it. The card will protrude
slightly, and you can then pull it out.