Sony 4-105-930-12(1) User Manual
Page 63
HVL-F58AM
4-105-930-12(1)
E:\HVL_F58AM\4105930121\4105930121HVLF58AMUC\01GB-HVLF58AMUC\060C03.fm
Master: Right
A
pplic
a
ti
ons
63
Setting wireless flash by flash only
Once you have performed the wireless flash setup in step [1], if you continue to use
the same camera and flash combination without changing the wireless channel then
you can also set the flash and camera separately to wireless.
Camera setting:
Set the camera to the wireless flash mode.
For details, refer to the operating instructions supplied with your camera.
Flash setting:
1
Press the TTL/M button to display
or
.
• When selecting
, the flash unit fires with the power level to be
set.
2
Press the MODE button repeatedly to display [ WL].
3
Press the Fn button.
4
Press the g or G button to make [RMT] or [RMT2] blink.
5
Press the Fn button.
• Make sure that the wireless channel of the off-camera flash is set to the
same channel as the controller. For details on setting the wireless channel,
see “Custom setting” (page