Specifications, English, Power management – Sharp LL-T1820-B User Manual
Page 27: Ddc (plug & play)
27
English
Specifications
The DVI-I input connector pin
Power management
The monitor is based on the VESA DPMS*
1
and the
DVI DMPM*
2
standards.
To activate the monitor's Power Management func-
tion, both the video card and the computer must
conform to the VESA DPMS standard and the DVI
DMPM standard.
*
1
DPMS: Display Power Management Signalling
*Not using USB hub
*
2
DMPM: Digital Monitor Power Management
*Not using USB hub
DPMS mode
Screen
Power
H-sync V-sync
consumption
ON
Display on
51W
*
Yes
Yes
STANDBY
No
Yes
SUSPEND Display off
5W
Yes
No
OFF
No
No
DMPM mode
Screen
Power
consumption
ON
Display on
51W
*
OFF
Display off
5W
No. Function
No. Function
1
TMDS data 2-
16
Hot plug detection
2
TMDS data 2+
17
TMDS data 0-
3
TMDS data 2/4 shield
18
TMDS data 0+
4
N.C.
19
TMDS data 0/5 shield
5
N.C.
20
N.C.
6
DDC clock
21
N.C.
7
DDC data
22
TMDS clock shield
8
23
TMDS clock +
9
TMDS data 1-
24
TMDS clock -
10 TMDS data 1+
C1
Analogue red image signal
11 TMDS data 1/3 shield
C2
Analogue green image signal
12
N.C.
C3
Analogue blue image signal
13
N.C.
C4
14
+5V
C5
Analogue GND
15 GND
Analogue vertically synchronised
signal
Analogue horizontally synchro-
nised signal
DDC (Plug & Play)
This monitor supports the VESA DDC (Display Data
Channel) standard.
DDC is a signal standard for carrying out Plug & Play
functions on the monitor or PC. It transfers informa-
tion such as degree of resolution between the moni-
tor and PC. You can use this function if your PC is
DDC compliant and if it is set so that it can detect
the Plug & Play monitor.
There are many varieties of DDC due to the differ-
ences between systems. This monitor works with
DDC2B.