Elevation calibration – Star Trac 620-7920 User Manual
Page 51
ELEVATION CALIBRATION
The Elevation Calibration function allows for calibration of the treadmill's elevation function. To enter the Elevation Calibration function:
1.
While in the Maintenance Mode, navigate to the Elevation Calibration by the next
or the previous
parameter buttons.
Press the
key, the Information Window will display the message “USE INCLINE +/- TO MOVE ELEVATION”.
2.
Press the
key, as necessary, until the treadmill is at its lowest elevation. When desired minimum elevation is obtained,
press the
key.
3.
Next press the
key, as necessary, until the treadmill is at its highest elevation. When desired maximum elevation is
obtained, press the
key.
8.
Press the S
TOP
key to exit the Elevation Calibration function.
STAR TRAC E SERIES TREADMILL O
WNER
’
S
M
ANUAL
41