Manager mode, Ettings and, Esting – Star Trac 620-7920 User Manual
Page 47
After having used your STAR TRAC E SERIES TREADMILL for many workouts, you may wish to change some of its settings.
MANAGER MODE
The Manager Mode allows you to query and modify the basic settings of your treadmill. To enter Manager Mode:
1.
Press and hold the , ,
and keys
together.
2.
A beep will sound and “MANAGER MODE” will display momentarily in the Information Window.
3.
Release the keys. “MCI VX.XX CKSM XXXX” will display in the Information Window.
NOTE: The system will automatically exit Manager Mode if no key is pressed for 30 seconds.
The following keys are available in MANAGER MODE:
Incline Keys: Displays the next
and previous
parameter, respectively. Keys will repeat if held.
Speed Keys: Adjust the value of the displayed parameter up and down, respectively, in increments of 1 unit or 0.01
unit, as appropriate for the parameter. These keys do not save the new value - see
Key below.
OK Key: Updates (saves) the value of the displayed parameter in Flash memory. Alternatively, the S
TART
key may be
used (see above).
Number/Program Select Keys: Enter new data item values for numeric parameters.
Stop Key: Exits Manager Mode and restarts the treadmill greeting.
The items that you may display and change with the previous keys are:
S
ETTINGS AND
T
ESTING
STAR TRAC E SERIES TREADMILL O
WNER
’
S
M
ANUAL
37
Lowest
Default
Highest
Item
Value
Value
Value
Meaning
MC1 V X.XX
N/A
N/A
N/A
Display’s primary processor software version and checksum.
MC2 V X.XX
N/A
N/A
N/A
Display’s secondary processor software version and checksum.
SERIAL NO
0
0
65,535
Treadmill serial number.
UNITS
-
English
-
English = units of pounds, miles, hours, minutes, seconds, feet, inches;
Metric = units of kilograms, kilometers, hours, minutes, seconds, centimeters.
TIME
5
99
99
Maximum time in minutes allowed for program, including warm-up.
WEIGHT
1
155/70
500/226
Default (to user), typical weight in lb (UNITS=English), or kg (UNITS=Metric).
LANGUAGE
-
English
-
Language in English, Dutch, French, German, Portuguese, Spanish, Swedish,
Italian or Katakana.
METS
OFF
OFF
ON
ON=METS display enabled.
OFF=METS display disabled.
PAUSE
30
45
120
Pause duration during a program, in seconds, either 30, 45, 60, 90 or 120.
AUTO FAN
OFF
ON
ON
Turns ON the fan 1 minute into the program.
ELEVATION
OFF
ON
ON
ON= Elevation function enabled.
OFF= Elevation function disabled.
C
HAPTER
6