Star Trac 620-7920 User Manual

Page 27

Text mode
Original mode

620-7920 Rev A

Step 5.
Using a Phillips head screw driver, remove the
screw that holds in the headphone jack cap at
the lower front of the hot bar.

Retain the

screw.

Step 6.
Remove the headphone jack blank cover.

Note:

You will no longer need the cover and it can

be stored away for any possible future use.

Step 8.
Select the E-TRx headphone mount from the kit
and attach it to the available cut-out at the lower
front of the hot bar, then secure with previously
retained screw.

Step 7.
Identify the two headphone board mounts that
came with the kit:
a. E-TR headphone jack mount.
b. E-TRx Hot Bar headphone jack assembly.

Note:

You will not need the E-TR headphone jack, if

desired, you can store it for any possible future use.

E-TR Headphone

jack mount

Hot Bar Headphone

jack assembly