Sharp XE-A201 - Manual (Page 6)

4
PARTS AND THEIR FUNCTIONS
Front view Rear view
External View 1
The printer is one station type thermal printer, and therefore it does not require any
type of ink ribbon or cartridge.
Lift the rear of the printer cover to remove. To re-install, hook the pawls on the
cabinet and close.
Caution: The paper cutter is mounted on the cover. Be careful not to cut
yourself.
Print head release lever
The print head can be lifted off the roller by the print head
release lever (light green lever on the right side of the
printer). Pulling the lever toward you moves the print head
away from the roller. If the paper becomes jammed, you
will need to use this lever to release the print head from
the paper to remove the jammed paper.
Do not attempt to remove the paper roll with
the head in the down position. This may result
in damage to the printer and print head.
Printer 2
Operator display
Receipt paper
Drawer lock
Drawer
Printer cover
Customer display
(Pop-up type)
Mode switch
AC power cord
Keyboard
Print head
release lever
Paper roll cradle
Take-up spool
A201_1 01.11.11 10:20 AM Page 4