Sharp LL-T17A4 - Manual (Page 9)

9
English
Deut
sch
Français
Italiano
Español
English
Product description
1. INPUT button ........................... [ LL-T17D4 ] To switch between the signal's input terminals.
2. MENU button ........................... This button is used to pop-up, select and close the OSD (On Screen
Display) Menu.
3. / MODE button ..................... When the OSD Menu is displayed:
This button is used to select menu options.
When the OSD Menu is not displayed:
This button is used to set DISPLAY MODE.
4. buttons ............................. When the OSD Menu is displayed:
These buttons are used to select an option or adjust the value of the
selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness and speaker
volume.
5. Power button ............................ Pressing this button turns the power on.
Press the button again to turn the power off.
6. Power LED ............................... This LED is lit green when in use and orange when in power-saving
mode.
7. Speakers .................................. Audio entering via the external device connected to the monitor can
be heard.
8. Headphone terminal ............... Headphones (commercially available) can be connected here.
9. Main power switch
10. Power terminal
11. DVI-I input terminal ..................
[ LL-T17D4 ] The computer's digital RGB output terminal or analog
RGB output terminal can be connected here.
Separately sold cables are necessary for connection. (p.8)
For a digital signal input: It can be connected to a computer with a
DVI-compatible output terminal (DVI-D24 pin or DVI-I29 pin) and
which has SXGA output ability. Depending on the computer to be
connected, correct display may or may not be possible.
12. Analog RGB input terminal ..... The analog signal cable is connected here. The analog signal cable
included should be used.
13. Audio input terminal ................ A computer's audio output terminal can be connected here. The audio
cable included should be used.
14. Security lock anchor ................ By connecting a security lock (commercially available) to the security
lock anchor, the monitor is fixed so that it cannot be transported.
The security slot works in conjunction with Kensington Micro Saver
Security Systems.
15. Ventilation openings ................ Note: Never block the ventilation openings as this may lead to
overheating inside the monitor and result in malfunction.
[ LL-T17A4 ] [ LL-T17D4 ]