Siemens WFXD5200UC - Manual (Page 22)

21
During WashĆ
ing
Changing a program
q Turn the program selector to
off.
q Turn the program selector to a
newly selected program.
The start/pause indicator light
flashes.
q If required, change the settings;
see from Page 19.
q Press the start/pause button.
The program starts.
The indicator light is lit.
Add a garment /
Interrupting the
program
You can put laundry in the drum
later, take laundry out of the drum
early or interrupt the program at any
time.
i It is not recommended to add
laundry after the washing phase
is complete.
i You can add or reduce laundry
as long as the start/pause
indicator light flashes (red).
q Press the start/pause button.
The start/pause indicator light
flashes.
q Open the door.
q Place/remove the laundry.
q Close the door.
q Press the start/pause button.
The program continues.
The indicator light is lit (red).
i When the start/pause indicator
light is lit (red), the program can
be interrupted, however the
door cannot be opened for
safety reasons (water level,
temperature or speed too high).
i If the spin speed is too high, the
start/pause indicator light is lit
(red). Laundry can be added in
Pause" mode when the drum
is at a standstill.
Canceling an active
program
If you would like to terminate a
program and remove the laundry:
i If a program is interrupted at a
high temperature, leave the
laundry to cool down until the
glass is cool to touch.
q Turn the program selector to
off.
q Turn the program selector to
drain or spin.
i For spin, select the desired
spin speed (but not no final
spin).
q Press the start/pause button.
q Wait until this program ends.
q Open the door.
q Unload the laundry.
i If a program is interrupted at a
high temperature, the door may
remain locked until the
appliance has cooled down.
i If the program is terminated by
switching off the appliance, the
door may remain locked.
After Washing
The start/pause indicator light
goes out.
0:00
appears in the display.
q Open the door.
q Turn the program selector to
off.
q Close the taps.
q Remove the laundry.
If no final spin" preselected
The start/pause indicator light
flashes.
q Turn the program selector to
drain. The start/pause
indicator light flashes.
q Press the start/pause button.
The indicator light is lit.
q When this program has ended,
open the door.
q Turn the program selector to
off.
q Close the taps.
q Remove the laundry.
q Leave the loading door ajar to
allow the inside of the washing
machine to dry.