Sagem ITD 60 User Manual

User manual, Digital terrestrial tv receiver

This manual is related to the following products:

ITD 59 ITD 62 ITD 61 ITD 64 ITD 58 ITD 68 ITD 72

Table of contents

Document Outline

QUICK START
CONGRATULATIONS!
- ITD 58 / ITD 60 / ITD 61 / ITD 62 / ITD 64 / ITD 68 / ITD 72
- Digital TV Receiver
Quick Start Guide
- IMPORTANT NOTICE
  - Before unpacking this product further,
    - Your Set Top Box is supplied with default code 1234.
Have you or your local store checked your Postcode for reception?
- Telephone number for your local store is on your till receipt.
- Should your Store be unable to help, please check the following Website Links for Digital Terrestrial signal coverage:
- http://www.dtg.org.uk/consumer/freeview.html
- htmlhttp://www.freeview.co.uk
- http://www.bbc.co.uk/digital
- Please note : In order to receive quality digital signal
- you may need an aerial upgrade.
Connection diagram
- On ITD 58/59, only analog channels can be recorded.
Installation Guide
- Getting Started
- Setting up your Set Top Box
- Reception issues
Reasons to upgrade your aerial installation
- They are 3 main reasons why you may need to upgrade your aerial :
Warnings
- CONTENTS
- CONTENTS
- 1. GENERAL INFORMATION
- 2. GENERAL DESCRIPTION
- 3. CONNECTIONS
- 4. FIRST TIME INSTALLATION
- 5. BOX ADVANCED SETTINGS
- 6. USER SETTINGS
7-1 CHANNEL CHANGE
7-2 PROGRAM INFORMATION
- Every time you change channels, you will receive program information for a few seconds (in the User preferences menu (see page 11), you can select how long this information will be shown). The information may include:
7-3 EXTENDED PROGRAM INFORMATION
- The Set Top Box can display information about programs currently being broadcasted as well as those that will be broadcasted next.
- By pressing INFO while watching TV, you will get the “Program information” banner.
- A - Program information (see page 15)
- B - Short summary
- C - Next program
- If necessary, use key to continue reading on the next info page.
- If the icon is displayed (see D), an extended summary is available.
- Press INFO to display it.
- Use cursors and to switch between the current and the next program information.
- When there is a lot of text information, use cursors and to continue reading on the next info page.
- You can see another channel information by pressing cursors and .
- By pressing , you will watch the video. Press INFO or EXIT to return to TV mode.
7-4 TV CHANNELS LIST
7-5 AUDIO LANGUAGE AND SUBTITLE LANGUAGE SELECTION
- By pressing or , you open the menu that lets you enter temporary settings. Settings made in this “options menu” are only valid f...
  - 7-5-1 Audio language
- When available, you can choose select among the different languages being broadcast.
- ITD 64 only: If a digital audio stream is available,“DA” eg digital audio - will be displayed on the same line than the audio language tag. This allows you to choose between stereo or home cinema audio tracks.
- Please note: when you select a digital audio, there will be no sound output from the analogue audio connections.
  - 7-5-2 Subtitle language
- When available, you can select among different subtitle languages.
7-6 VOLUME ADJUSTMENT
- To increase or reduce the volume, use cursor or .
- To turn off the sound quickly, press the mute key.
- Press the mute key again to restore the sound.
- The audio volume cannot be adjusted in the VCR and TV modes.
7-7 TV MODE
- With the button, you can toggle between external connected equipment, such as e.g. a digital terrestrial TV or a video recorder (the video must be switched on).
- (This is only valid when the units are connected via SCARTcables, and not by RF connection).
7-8 DIGITAL TEXT SERVICES
- Pressing key will launch digital text services when broadcast. These interactive applications give you access to various information.
7-9 TIMER PROGRAMMING (not available on ITD 58/59/60/68)
- Go to main MENU/TIMER PROGRAMMING
- The Timer programming function enables the Set Top Box to:
  - 7-9-1 Sleep timer
- Enter the selected sleep hour.
- Confirm with .
  - 7-9-2 Events timer
- You can make the Set Top Box start and stop at a predefined time.
- The timer function is very useful when you want to record a program and you are unable to start/stop the recording event yourself, or when you just want to be reminded of the start of a program you do not want to miss.
- The different start times must not overlap each other.
- Up to 6 different events can be predefined.
- At each stop time, the box will return to standby.
- During the predefined event in process, you can stop it by pressing the MENU key during 10 seconds.
7-10 ENHANCED PROGRAM GUIDE (not available on ITD 58/60/68)
- To display more detailed information about a selected program, press the key . To remove this information, press EXIT key.
- Note: information about a selected program can be displayed only if available from the broadcaster.
7-11 FREEZE VIDEO (not available on ITD 58/59/60/68)
- The current video can be frozen using the STILL key.
- Pressing the STILL key again video is then released.
- In order to avoid screen burning, brightness is automatically decreased after some minutes. Normal brightness can be recovered pressing the STILL key again.
- WARNING: keeping the video frozen with full brightness for a long time can damage your TV.
7-12 RADIO MODE
- Press the key on the remote control unit of the Set Top Box.
- You can move through the list displayed using and .
- You can adjust the volume with and .
7-13 SET TOP BOX ENHANCEMENT
- The Set Top Box goes in this state when a new version of software is available on the network after startup.
- Then a screen for “download process” request is displayed.
- You can delay the downloading process by pressing the EXIT key. This process will be displayed again the next time you switch on your Set Top Box. When pressing the key, the downloading will be performed:
- During this mode, no action from the user is authorized.
- Once the process is completed, the receiver will switch on automatically. After startup an information screen is displayed on download completed. Then press and enjoy with your last viewed program.
- Note: if the download process is not correctly performed, the screen stays black and the green led flashes indicating the cause of the failure (see table below).
- When an error occurs, press any key on the remote to continue. Then put the Set Top Box in standby mode and switch it back on to perform downloading again.
- If this operation does not succeed, unplug the main cord and the antenna cord. Then plug them again to perform downloading again.
7-14 TROUBLESHOOTING
- Error Code
- Origin of Error
- User Action
- 1, 2 or 3 flashes
- Reception error
- Acknowledge the message by pressing any key on the remote control. If necessary, repeat your request.
- 4, 5 or 6 flashes
- Flow validity errors
- Acknowledge the message by pressing any key on the remote control. If necessary, repeat your request.
- 7 or 8 flashes
- Local errors
- Acknowledge the message by pressing any key on the remote control. If necessary, repeat your request.
- 9, 10, 11 or 12 flashes
- Various errors
- Acknowledge the message by pressing any key on the remote control. If necessary, repeat your request.
- 14, 15, 16 or 17 flashes
- Defective Set Top Box
- Contact your retailer for replacement.
- The remote control has no effect on the Set Top Box
- The red front panel LED remains on
- A black screen or an error message is displayed
- Bad reception with a portable antenna
7-15 OUTLINE SPECIFICATIONS
7-16 GUARANTEE (TERMS AND CONDITIONS)
- ATTENTION
- In order to apply the guarantee, you should contact your dealer
- or Sagem Communication helpdesk at 0905 77 48 081 (0.15 £/min, tariff cost effective form 27/06/2005).
- Proof of purchase will be required. Should any malfunctioning arise,
- the dealer or Sagem Communication helpdesk will advise you what to do.
- If you bought your equipment from Sagem Communication directly, the following shall apply:
- 8. ENVIRONMENT