Sharp DX-C401 - Manual (Page 138)

136
FREQUENTLY ASKED QUESTIONS
Making a copy of a non-standard size
original
The procedure for making a copy of a
payment slip or other non-standard size
original is explained below.
The "Centering" special mode of copy
mode can be selected to position the
copied image in the center of the paper.
(1-14)
inch 8 X
Y 6
Original
Size Input
OK
OK Cancel
(1-8 1/2)
inch
From the base screen of copy mode,
touch [Original] then [Size Input].
If the X dimension (width) of the
document is less than 3-1/2" (89 mm)
or the Y dimension (height) is less
than 4" (100 mm), place the original
on the document glass.
When using the automatic document
feeder, use "Slow Scan Mode" for a
thin original.
1 Place the originals.
2 Enter the original size.
mxc401_us_qck.book 136 ページ ２００８年１０月１６日 木曜日 午前１０時５１分